Quick Overview
These Turn Signal offer an incredible value. Lots of LED's will make them very bright. They mount using a 10mm mounting stud, this gives them a lot of mounting flexibility and easy install.
They feature 15 High Intensity LED's in each Signal, Bright enough to get you noticed even on Sunny Days.
These Lights are E11 E-Mark Certified
LED's draw less current than Conventional Bulbs.
This can cause the signals to blink faster than usually.
We recommend adding a Resistor to correct the current drop.
Description
Stats:
One Pair (2) of Black LED Turn Signals
Wiring: Two Wire, 12 Volt Systems
Bulb: (Amber) 15 High Intensity LED's - 12V 2W (Resistor Recommended)
Install: Universal Signal, will fit many different bikes, installation will vary, may require modification.
Dimensions: 2 1/2" Long (not including metal mounting stud)
Lenses Measure 2" Long 1" Wide
Stalk is 3/4" Long (Without Mounting Stud)
Mounting Stud is 10mm DIA and 16mm Long
This is a Universal item. Additional modification might be needed to fit your ride.
You may also be interested in following product(s)
|
|