Lighting - Relay - LED Flash Controller - 2 Pin - Honda - 38301-MBW-D21, 38301-KK9-952, 38301-MG9-681

  • $9.95
  • Save $8
Shipping calculated at checkout.


Our LED Relay is designed to correct the Hyperflashing that you encounter when converting to LED Turn Signals.  It is also perfect for replacing an old or damaged Relay, without paying OEM prices.

Replacing the Relay with an LED Relay is the easiest way to correct hyperflashing because it is a simple Plug-and-Play installation.  Alternatively, you can also add a resistor to each LED Turn Signal, but with our relay, you will not need to wire resistors to each signal, saving you time and money. Our Relay works with both LED's and Conventional Bulbs.


Fits:
Honda:
CBR 600 F Hurricane 87-90
CBR 600 F2 91-94
CBR 600 F3 96-98
CBR 600 F4 99-00
CBR 600 F4i 01-06
CBR 600 RR 07-12
CBR 900 RR 93-99
CBR 929 RR 00-01
CBR 1000 RR 04-11
CBR 1000 F Hurricane 87-96
CBR 1100 XX Blackbird 97-03
CB 400 F CB-1 89-90
CB 450 Nighthawk 85-86
CB 600 F 599 2004
CB 550 Nighthawk 83
CB 650 Nighthawk 83-85
CB 700 Nighthawk 84-86
CB 900F 919 Hornet 02-07
CB 1000 R 12-16
CB 1000 83-95
CB 1100 83
CMX 450 Rebel 86-87
CX 650 1983
GL 1100 Goldwing 1983
GL 1200 Goldwing 84-87
GL 1500 Goldwing 88-03
NSS 250 01-07
NT 650 Hawk GT 88-91
PS 250 Big Ruckus 05-06
RVF 750 RC-45 94-
RVT 1000 R RC51 SP1 & SP2 00-06
ST 1100 91-02
ST 1300 03-10
VTR 250 Interceptor 89-90
VF 700 F Interceptor 84-85
VF 750 F Interceptor 82-97
VFR 800 F Interceptor 98-09
VF 1000 F Interceptor 1984
VF 750 Sabre 82-83
VF 1100 Sabre 84-85
VF 700 Magna 84-87
VF 750 Magna 82-03
VF 1100 Magna 83-86
VF 1000 R 85-86
VFR 750 RC30 90-94
VTR 250 89-90
VTR 1000 F Superhawk 98-05
VT 500 Ascot 1983
VT 500 Shadow 1983
VT 600 VLX Shadow 99-07
VT 700 Shadow 84-87
VT 750 Shadow 83-85
VT 800 Shadow 1988
VT 1100 Shadow 85-86
VT 1300 12-13
VT 1300 Sabre 10-14
VT 1300 Interstate 10-15
VT 1300 Fury 10-18
VT 1300 Stateline 11-18
VTX 1300 03-10
VTX 1800 02-04

Install Notes:
Always conduct a side-by-side comparison to ensure you purchased the proper part before installation. Our LED Turn Signal Relay is a direct replacement for many OEM Relays. Note that the body housing shape of our relay may be slightly different from your OEM, but this Relay does have the same Plug pattern and 2-Pin connector for a quick and easy installation with no modification of the wires required. If there are shape diffrence, you may need to change the mounting position slightly by using Zip-ties or Velcro as reliable alternatives. Choose this product if simple Plug-and-Play installation is important to you. To install the Relay simply locate your existing relay, unplug your OEM Relay and then plug in our LED Relay. Suitable for the following motorcycles with no splicing required: (This item will also work on other 12v 2 wire systems by hard-wiring the relay)

Replaces these OEM Part Numbers:
(Will also fit other part #'s)
38301-MBW-D21, 38301-KK9-952, 38301-MG9-681