Lighting - Signals - Honda - Front - CBR 600 RR / F4 / F4I, CBR1000RR, CB600F

  • $17.99
  • Save $7
Shipping calculated at checkout.

Upgrade Your Ride with Honda LED Turn Signals for Enhanced Visibility and Style

Illuminate your ride with our premium Honda LED Turn Signals, designed to replace your OEM turn signals with a seamless, hassle-free installation. These high-quality, E-Mark certified (E-11 and E-4) LED blinkers boast an easy wiring install, thanks to their bullet connectors, and require no modifications to your fairing, allowing you to revert back to your OEM setup if needed.

Key Features:

  • Custom fit for most Honda models (front & rear, some models rear only)
  • High-impact plastic housing for durability and protection
  • 12 amber diodes for bright, attention-grabbing signals
  • Easy installation with bullet connectors and minimal fairing modifications
  • Compatible with 12-volt systems and replaces various OEM part numbers

Dimensions and Materials:

  • Multiple dimensions available (refer to photo(s))
  • Housing and base made of high-impact plastic
  • Base features a threaded bolt and nut washer

Elevate your motorcycle's appearance and safety with our sleek, bright Honda LED Turn Signals. Order yours today!

(Most models Front & Rear, some models Rear only)
Grom MSX 125 14-19
CBR 250 R 11-13
CBR 300 R 14-19
CBR 500 R 13-19
CBR 600 F4 99-00
CBR 600 F4i 01-06
CBR 600RR 03-19
CBR 650 F 14-19
CBR 1000RR 04-07 F&R 08-19 Rear
CB 300 F 14-19
CB 500 F 13-19
CB 600 F 03-19
CB 650 F 14-19
NC 700X 12-17

Install Notes:
Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location, you'll need to locate the existing Turn Signal Wires on your Motorcycle and identify whether you have 2 or 3 Wire System. For a motorcycle with a 3 Wire System: your Bikes Running Light Wires are not used for this installation as our lights are not designed or marketed for that application. For a 2 Wire System: the two wires coming from your bike should be the Turn Signal Power (Positive Wire), and a Ground (Negative Wire). Attach our YELLOW Turn Signal Wire to the Bikes Positive Signal Wire. Attach our BLACK Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly

Replaces these OEM Part Numbers:
(Will also fit other part #'s)
33400-MBW-A10, 33450-MBW-A10, 33403-MFJ-A00, 33453-MFJ-A00, 33400-MFJ-A42, 33450-MFJ-A42, 33450-MFJ-A43, 33400-MFJ-305, 33450-MFJ-305, 33400-MBZ-A10, 33450-MBZ-A10, 33400-MBW-670, 33450-MBW-670, 33400-MBW-671, 33450-MBW-671, 33400-MBW-A10, 33450-MBW-A10, 33403-MEL-670, 33453-MEL-670, 33400-MEL-A20, 33450-MEL-A20, 33400-MGS-315, 33450-MGS-315, 33450-K26-315, 33400-K26-315, 33450-MJE-315, 33400-MJE-315, 33400-MJE-315, 33450-MJE-315, 33400-MGZ-325, 33450-MGZ-325, 33450-KYJ-305, 33400-KYJ-305

We Also Recommend